There was a time when I made it a habit of collecting the 904 shape and its variants, had over 40 of them. It's an easy shape to clean up and really satisfying to restore.
Just To See If I Could
- Thread starter Chasing Embers
- Start date
PipesMagazine Approved Sponsor
Site Sponsors
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
If only they were around 1/2 inch deeper. I did however work out a faster means of removing rim build up on this restoration!?
.gif)
Thanks! It surprised me how quickly it went. Once I started, an hour later I had a smokable pipe.?
Nah, don't own one. After burning off the oxidation I shined the stem up by thumb buffing it with toothpaste and polished the stummel with a jeweler's cloth.
Normally I would scrub the rim with a wet paper towel that required a bit of time to remove all of the build up. This time I used a paper towel and acetone.
Would acetone work on the vulcanite stem, removing sulfur & gunk?
Acetone is available as nail polish remover?
Thanks!
That has to be physically removed as it's an oxidized material by abrasion or burning.
Yep.?